- Clean, under-dash mounted control box, with compact panel mounted dial
- Easy to use adjustment knob with push button override and LED status indicator
- Compact and rugged aluminium design that can be mounted at any angle
- Compatible with up to 2 axles
- 12v option available (see our other listing)
- 2 Year manufacturers warranty
* NOTE: Please check with your local transport authority to confirm that trailer mounted electric trailer brake controllers are permitted in your state.
Can't find what you need to complete the job? Send us a message, we have access to a wide range of parts that aren't currently listed!
REFER TO THE WIRING DIAGRAM AND THE NOTES BELOW FOR INSTALLATION
Minimum Input Voltage: 18 VDC
Nominal Input Voltage: 24VDC
Maximum Input Voltage: 30 VDC
No Current Load: 30 mA
Maximum Load: 2 Axle /14A avg
Weight: 200g
Dimensions [LxWxH]: 40mm x 79mm x 81mm
The control module has four (4) coloured wires, Black, Red, Blue & White.
Black wire is the positive voltage power supply line. A fuse must be fitted (Refer to table in wiring diagram for the relevant size)
Red wire must be connected to a point that receives a DC voltage equal to that of the supply voltage when the brakes are on. Generally for most vehicles we recommend that you connect the RED wire to the cold side of the brake light switch.
Blue brake wire must be connected directly to the trailer brake wire.
White ground wire must be connected to a grounded metal part of the dashboard, vehicle fire wall or directly to the negative battery terminal.
|
|
(BRAKECONTROLRBC-24)
| SKU |
BRAKECONTROLRBC-24 |
| Brand |
GSL |
| Shipping Weight |
0.5000kg |
| Shipping Width |
0.125m |
| Shipping Height |
0.060m |
| Shipping Length |
0.250m |
| Shipping Cubic |
0.002000000m3 |
| Unit Of Measure |
ea |
Be The First To Review This Product!
Help other S.D Online users shop smarter by writing reviews for products you have purchased.
Write a product review
